SOLD '89 Camaro RS for parts, 305 w/OD tranny, mint grey interior, factory mags, 83K heavy body damage. $1000 SOLD

SOLD NEW Top Fuel chassis, 300" Bare, by Mike Kase, $3200 SOLD

SOLD 348" Chevy Parts, Steel crank, 3-2 barrel manifold(no carbs), 4 barrel manifold w/carb, bare heads, distributor, cast exhaust, pan & brackets. $650 SOLD

SOLD55-57 Chevy Rear complete, drum to drum. $300 Wheels & Tires(white walls), hub caps. $200 SOLD

400" Dodge Motor, 4 barrel, chrome covers, runs good. $300

Blower Manifolds for BBC and SBC, street and comp. $250 & up.

Vertex Mag for Chevy $375

PowerGlide by Dynamic, 1.92 1st, 400 input, Hipster brake, not used since freshened. $1300

SOLD Never used 383" Chevy Motor, Aluminum intake, chrome pan & timing cover, 2.02 valves, Comp cam. $2300 SOLD

Tunnel Ram for BBC(no carbs) $150

16x33x15 Goodyear slicks, good but used $150

BBC big tube altered headers. $180

Assorted Wheels and tires & slicks, Assorted makes, offsets, widths, Bolt patterns & conditions, E-Mail with needs.

Phone:
914-483-7637 Days.
914-471-6257 Nights.
Ask for Tiny
Or Email outslaw2@aol.com

New Crower dual disc 9" slider clutch. $1800

Used Bear rotor/drum lathe with bench. asking $500

2 used Cragar wheels, polished 14"x15" 4 1/2" + 5" b-c. 4 1/2" back space $135

Phone:
914-471-1421 Days.
914-279-6577 Nights.
Ask for Bob.

SOLD 439" BBC, mooneyham polished 6.71 & manifold, polished 4 port hilborn injector and scoop w/ s.s. lines to nozzles, chevy bow tie alum heads, crower s.s. rockers, crane girdles, b&b polished valve covers, chevy 4 bolt block filled to water pump holes, steel crank, 8mm drive, vertex mag, enderle 110 pump, kinsler diaphram hi speed can, quick change jet can, milodon pan, eagle steel rods, JE 12.5 pistons, donovan gear drive, ran 7.93 @ 172 in 2,540 lb. '41 willys coupe. ready to run! located in san jose, ca. Tim Burns (408) 288-7363 agwillys@ix.netcom.com

Dan Olson dry sump oil pan for bbc $ 250, enderle belt drive and brackets for 110 pump $ 100, aluminum rabbit style radiator, shroud, & electric fan $ 200, internally balanced big block fluidamper $ 150, crower solid cam & lifters $50, 5 gal jaz upright style fuel cell $50, 5 gal jaz square fuel cell brand new $75, 1/2" pitch 38t polished blower pulley $50, holley strip dominator for oval port bbc heads $100, B&M chevy flexplate shield sfi $40, milodon bbc valve covers w/ breathers & chrome hold down bolt kit $25, chrome SBC valve covers W/ breathers and wing style hold down kit $25, 8 BME 396 alum. rods w/ aries 12.5 pistons, .030 over 396 $100, moroso alum alt. pully set $10, engle SBC hyd. blower cam $20, holley electric fuel pump $20, autometer fuel press gage w/ isolator #3410 $30, autometer oil temp #3441 $30, autogage water temp #2313 $10, autogage amp meter #2318 $10, autogage oil press #2312 $10, moroso #63420 waterneck/t-stat housing for chevy $20 Tim Burns (408) 288-7363 agwillys@ix.netcom.com

1955 Chevy Drag Car 11.60's @116mph, SB w/roller cam/lifters, th400 w/5500, 9" w/488's, roll bar, tubbed, 2700lbs only 7 passes on refreshed motor. $6500 for turn key. Trailer also available for? Dan in AZ @480-55 4-race(7223)

SOLD ALL STEEL, RUSTFREE 48 ANGLIA (HAS FIBERGLASS TRUNK LID) WITH RECESSED ALUMINUM FIREWALL. THIS IS AN UNMOLESTED LATE 60'S TO MID-70'S GASSER, POWERED BY A 402 BIG BLOCK WITH EDELBROCK ALUMINUM INTAKE AND HOLLEY CARB, ELECTRIC FUEL PUMP, FUEL FILTER AND PRESSURE REGLATOR. TURBO 400 TRANSMISSION AND A 57-64 OLDS REAR ON COIL SPRINGS WITH LADDER BARS. 10" AMERICAN MAGNESIUM WHEELS IN REAR. TUBE FRONT AXLE WITH CHROME SPRING AND WISHBONES WITH EARLY FORD SPINDLES AND 3.5"WIDE AMERICAN MAGNESIUM WHEELS.(NO FRONT BRAKES BUT EARLY FORD WILL FIT). INTERIOR HAS ONE UPHOLSTERED BUCKET SEAT AND MATCHING INTERIOR PANELS AND HEADLINER. NEW SEARS DIEHARD BATTERY AND ALUMINUM 5 GALLON FUEL TANK MOUNTED IN TRUNK. MOON GAS PEDAL. SAFETY GLASS WINDSHIELD WITH PLEXIGLASS SIDE AND REAR WINDOWS. THIS CAR RUNS, DRIVES AND STOPS. ALSO COMES WITH ONE PIECE GLASS NOSE. WOULD NEED ONLY SAFETY UPGRADES TO RACE OR WOULD MAKE A NEAT STREET ROD. $7,500 obo. SOLD CALL JACK AT 215-234-4997 or E-MAIL ME AT : jackolcott@webtv.com

510ci supercharged BBC complete, built by Atchison Machine Service, all the best parts. Bowtie block, Cola4340 crank, alum. Hamburger pan, Titian oil pump, Comp Cams roller valve train, Dart alum. heads,Front drive, Mallory Super Mag 4 w/rev. limiter, Enderle fuel injection, Littlefield 1471 High Helix. Run 6.50 @210 in 2200 Ib. car with auto. $22,000 US . Phone Dave at (519) 433-2811 London Ont. Canada (2 hours from Detroit) OR Pat at p-c.ryan@sympatico.ca

New rebuilt 355 sm .block decked squared,line honed,towing cam,9:8 CR.Pro built.Break in time only.$1700 .firm-Lincoln reverse pattern air shifter will operate T350,400,PG,727 or C6.includes bottle,regulator,and shifter-$250.00- Call 508-430-8534

Complete 468 BBC dom to pan, CSI water pump to SFI flexplate, all fresh [or new] most pieces new in boxes, TONS of extra's. ,must sell! Sheet metal intake to fit BBC tall deck, removable dual dom top, fits conv. heads, drilled for 2 sets of nozzles and watercrossover [-10] best offer, must go! Racepak 2000 complete w/printer, case, cables ,etc must go, email mike at bmariah@interlinks.net

81 malibu tube chassis car for sale. dana 60 rear, 4-link, control arm front. certified. set up for bbc and t-400. call or email for more info or picture. 517-223-4145 Dave Miller

1932 Bantam Altered- 302 small block chevy, Brodix Aluminum Heads, Roller Rockers, Steel Crank, 13.1 Compression, Crower Rods, Gear Drive, MSD 7Al, MSD Distributor, Two step, Dedenbear delay box, dynamic power glide, 8" freddy brown converter, trans brake, dana 60 rear, Mark Williams axles, spool, ring & pinion, Hoosier rear tires, C&F wheelie bars, chassis certification 1/04 $17,500 complete car & trailer contact: Tommy (914) 227-2645 or (914) 227-6587

SOLD 1986 GMC Dually Crew Cab - New 454 Motor with less than 5,000 miles, new transmission, new tires, new radiator & new rear sliding window. Runs and tows excellent. Asking $10,000. Skip 914-452-4566 SOLD

1969 Camaro NHRA Legal Stock Eliminator Racecar, F/SA, 396/325 L&L Motor, ATI Trans & Converter, Lunati, MSD, Simpson, Cragar, Hoosier, 6-7 Under. $13,500 OBO, MUST SELL Also Have Motorhome and Open Trailer EVERYTHING MUST GO. Gary Brown 914-737-8205

2 Race engines: (#1) 434 s.b.chev. 820 h.p.,650 ft lbs. professional built,complete intake to pan,currently fresh. $14000 (#2) 500 BBC, pro stock 1100 h.p. at 7800, 834 ft lbs @6000. Complete carbs to dry sump, $13,750, currently fresh. dgrubb1046@aol.com 253-627-7343

125"Altered-23 T Bucket,498 BBC-Meth Inj.Complete Set Up.Runs Low 8's-Best ET so for is 8.16 @166 mph.Currently running with NETO club-Pro built by Ben Jacobson 1991 chassis-Cert.NHRA 'till 8/2002.4 wheel disc,Dana 60,PG .1780 lbs.w/o driver.Nice ride-$18,500.'96 GMC dually -low miles-and 18'enclosed trailer-also avail. Don Taber 508-982-7828

1 pair of brad stg.1 billit alum. single plug heads,complete w/ victory light weight valves, manely springs, all studs, race ready $2900.00 1 mertlittlefield high helix retro blower, alum case, new billet roters(25 passes), alum snout and starter bracket, new teflon, race ready $2700.00 16 4.375 pistons new/used w/ sleeves, ring plus spares take all $400.00 2 sets of brooks used rods 220 long 15 passes $200.00 each set. simpson snell 85 funny car helmet w/ stocking and sheild size 7 1/2 $150.00 1 new halon fire bottel in box $200.00 Bruce Peterson Jr.

1989 Chevy 4 X 4 Suburban. Two-tone blue with blue velour interior. P/W, P/L, AM/FM Cassette. Some rust. Just replaced rear & had tranny rebuilt last year. Asking $5,000 Skip & Dawn Harris 845-452-4566

**SOLD** 1988 Ford Duelly Crew Cab, 1-TON,460 EFI,10k on Motor,Gale Banks Intake & Exhaust systems,Comp Cam Towing Cam, New C-6 Tranny,Shift kit, Towing Convertor,Turbo Wing, S.S.Wheel Covers, Duel Tanks W/140 gal aux. Set-up for Gooseneck & Tag Trailers,Loaded w/ Many, Many Extras,70k on truck, $12,500.00 Tiny Eglit

1923 T-Bucket Fresh 498 ci BBC Injected on Meth.with build sheet/w/documentation.PG.dana 60,1780# w/o driver-will fit large person.All the electronics.Pro-built chassis-NHRA cert .till '03.Nice ride.125" goes straight.Runs 8.0's Pictures availiable.$20k.FIRM.508-982-7828 Don Taber.

1996 GMC 3500 4x4 Dually.45k miles,Red w/grey interior.ext-cab.454 vortec.SLE Pack.AC,cruise,tilt,CD,remote start,dig radar dect,alarm,etc,etc,etc.Maxed out,high cap-towing pack-GMC's best dually-100k bumper to bumper protection.Excellent Condition.$22,500.00 FIRM-508-982-7828 eves Don Taber.

14-71 MOONEYHAM Blower, Anodized rotors,Polished Case, Fresh Restrip.$1,400.00
BBC,Vertex OXC Mag[external coil],W/Vertex offset,PSI rev limter, New Vertex Coil fresh,$900.00
Tiny Eglit. 845-483-7637

481 Rodeck(496ci) 10.200 deck height, splayed caps, never hurt or windowed. Crower crank w/hemi snout, Erson cam;706 lift 326 duration, Brooks rods(8 new in motor,11 spare),Ross pistons 4.310,(3spsare). Alum.BBC symet.port Pro-stock heads.114cc, 2.250int./1.940exh. Manley valves, Crower springs,Erson lifters, Jesel rockers(roller)1.8 int/exh. Hogan manifold w/burst panel & "O" ringed. Littlefield blower w/alum. case & teflon. Enderle bird-catcher,alky barrel valve, 110 pump, Supermag 4, & Hi-Torque starter. Just freshened for 2001 season. Hat to pan race ready. Runs low 7's in 2250# car with 20# of boost. Great CIFCA, NE1, AA supercharged or ? All tech & tune sheets,nozzles, spare parts, 7 pulleys, belts & tools go. $14,500.00 Call Wes @ 909-657-0456 or Bob @ 909-781-7911 famfun@1stcallspecialty.com

M/T SLICKS 32/14.5/15 $175 SBC 11.1 ROLLER CAM. STEEL CRANK, PORTED HEADS AND MANIFOLD $2000 Al Zimbaldi 845-528-8567

68 SS Dart look-a-like, 500 cu.in.440/727 w/brake. All pics/engine specs/times can be seen on my website; http://www.geocities.com/MotorCity/Flats/5468/images1 $15,000 with extras/$7,500 rolling. Don Benedict Jr.

1995 Dodge Ram Extended Cab Dually, 69,000 miles, asking $16,500 732-422-0264 Lou Sgro

1955-1968 Chevy CAR Front Drum To Disc Brake Conversion Kit Complete $494.95psh. Comes With DUAL Master Cylinder, G.M. Brass Proportioning Valve And Bracket, 2/Steel Lines, 2/Flex hoses, 2/11'' Rotors 4x3/4" bolt pattern, 2/seal, 4/bearings, 2/dust covers, spindle nuts and washers, pads, Hardware, Plus Quality One Piece Caliper Brackets That Bolt on To The OEM Factory Spindles And 2/Rebuilt Calipers. Frank 518-223-8888

78 Malibu new tuberoller,Built by Automotion Race cars in Indy,M/S Alston Pro link chassis w/ FC cage,tubular a-arms,coil overs ( 4) Wilwood rack,disc,Gebhart 9" 4.56,spool,4link,wishbone,2 poly seats,steel tubs,alum.motor platesfor BBC/Turbo,Welds,Mickeys, Harwood cowl hood,glass bumpers,can e-mail pics,this is a new unfinished car, over $13000 in reciepts, SELL $ 7500. firm Bob Cohen 219-264-2694

1982 Chevy C30 Rollback rebuilt 350 needs work asking $1,495.00 will talkMichael Murphy (845)462-2294

S.P. 1974 GTO hatchback 1971 455 h.o.4 bolt mains 7f6 round port heads alum. rods warrior intake 850 cfm. T400, 9"ford spool 31 spl axels,mint candy red,electronics,turn key $11,500 divorce coming soon! 1963 Tempest Lemans Fiberglass hood W/Harwood Areo scoop.excellent shape $200.00 plus shipping Ron Bush 716-664-9638

FunnyCar Body 90 Tempo - complete with tin, widnows, escape hatch and rear spoiler. YOU PAINT! $ 700.00 OBO 1 CONVO PRO NON-BEAD LOCK 16 X 16 $ 175.00 EACH 1 SPE FLOATER ASSEMBLY WITH HOUSING $ 1,400.00 (NEW) HEMI FUNNY CAR HEADERS $ 225.00 Harry

WANTED!!! Front 17"x2" rims for nostalgia fed. Spindle mount. Spoke, Hilibrand, or what have you?? David Newton 802-849-6941

Wanted 1970 street stock race ready , for 1/4 clay track . trailer wanted as well but not needed. Ron

WANTED Set of short stacks 4" 6" for sbc Hilborn Injection. Also considering complete blower set up with all saftey equipment for sbc. David Newton 802 849 6941

Hillborn Fuel injection setup for BB-Chevy, with timing cover, pills/line, black stacks, good condition, $950 must sell, contact via phone number any time. George Tenca 708-878-2089

68 camaro strut front, dana rear blown injected BBC, glide, must sell 18,000 will talk. John Solkovy 724-822-7371

SBC 23* competition Blower manifold drilled for port nozzles $425.00 *-* SBC 23*custom made Blower manifold tunnel ram 100% ported drilled for port nozzles $ 425.00 *-* Brodix SBC 23* part # 1000 single 4 manifold $225*-* MSD SBC/BBC distributor for crank trigger New $ 125.00 # 84697 *-* MSD multi-step (3) retard $ 95.00 #8970 *-* MSD 2 step $35.00 # 8739. Andy C. 845-368-4928

383 stroker steel rods, kb pistons, roller cam, holley carb,mallory ign. pete jackson gear drive $2000 Steve Smith 740-362-8138

1979 Buick Skylark 2-door. no motor or trans. asking $300 cash. Brian Corbett 1-915-580-7210 leave message or 1-915-335-8952. Odessa Texas

New 1955/1957 Chevy Car Ball Bearing Idler Arm Conversion Kit Complete With Lube Fittings Built In. $89.90 Frank

40 willys coupe project, $20,000, steel body and doors, fiberglass 4-piece front end and rear fenders, stock frame. old gasser 392 and torqueflight, halibrands, olds rear, drilled i-beam axle, rust free. Adam

Outlaw Performance ’40 Willys Coupe, blown 392 hemi, 654hp, un-tubbed, ‘60’s gasser style, tube front axle, coilovers on all 4 wheels, polished Wilwood 4 piston calipers on all 4 wheels, 15”x6” polished ET/X 10 spoke with 195/65-15 fronts, 15”x10” polished American Torque Thrust II’s with 285/70-15 rear, all polished stainless control links front & rear, Vintage Air, ididit, Lecarra Banjo Wheel, Red leather Glide Engr. split back bench seat, Black Dupont Single Stage, Eclipse C/D head unit with Eclipse 6 disc changer, twin Sony amps, Infinity Kappa speakers w/Bazooka 6” subwoofer, 2000 Goodguys Columbus Nationals “Willys Roundup Pick”, 4 Goodguys shows – 4 Picks, driven coast to coast August ’01 to compete in Rod & Custom Magazine’s 1st annual Asphalt Ego-Rama Shootout, 1 of 9 cars picked to participate, very streetable & dependable, the Willys was built as a driver but it shows very well, $75K, price VERY negotiable, call or e-mail for more pictures. Dan Lockwood 989-631-4834.

Fab 9 inch sheetmeatl housing w/alum center section Areo disk brakes 4 piston calpers mosher axles complete rear ready to install -old alum altered sty fuel cell nice shape. 603-330-0370

Parting out 1987 gta transam lots of really nice hard to find parts exshow car hit on drives side. Randy Carpenter 937-498-1099

Looking for a pre 1979 Funny car body to fit a 125"wheel base chassis.Will consider complete cars also.I live just outside of Chicago,Il Thomas Howe (630) 257-3403

big block chevy 472 short block with 0 miles, new wiseco forged pistons, solid lift comp cam, milodan oil pan and windage tray, etc. 600+ hp on pump gas. $2500 Brett Nordby 360-871-3778

WANTED: 1970 or earlyer Chevrolet Funny Car body, 125" (Corvette, Camaro etc.) with or without tin. Will also trade for late model Pontiac TA body complete with tin. Kevin Sylver (508)760-3000

SBC custom grind cam 540 lift 295 dir new. $125 6061 edelbrock aluminum heads for sbc 202x160 valves $475 Don

S-10 Dragtruck for Sale 1982 s-10 drag truck for sale. NHRA certified till 2003,9" ford,moser axels,strange full spool,5.14 pro gear,weld wheels,14x32 slicks, goodyear front runners,new Hal adj. alum. coil over shocks,chassis engineering ladder bars,5 gal. fuel cell,b&m pro stick,autometer gauges,MSD 6al with 2 step,Dedenbear delay box,Shiftnoid electric shifter,small block headers,1st in class at World of Wheels Car Show,6.11 @ 112m.p.h. in 1/8 mile, 1.28 60 ft.,weighs 2620 with small block and glide,$8300 or $7800 without electronics. Might sale turnkey.Tilt bed open trailer with large storage box also available.Joe @ 1-740-886-4553 Joe Martin

1980 chevy monza coupe,ladder bars,dana 60,powerglide,electronics,just needs engine.Asking $7000 for more info and pictures e-mail me thanks. Duane

2- Holley 660 center squirter carbs matched pair . Local owner of a carb shop with flow bench matched these to his BG 660's. 4 corner idle circuits, annular discharge boosters, milled air horns, Chrome linkage,bowls, and pumps. Replaceable idle and high speed air bleeds. $800 pair, OBO or might trade???? I am running a sbc. Jack Chambers

1971 DODGE CHARGER SE driver,needs some work.$2100.OBO 940-592-5280 evenings also,1984 Chev.1/2LWB $2000.1955 Chev.orig.rear-end,needs rebuilt and spider gears.$200.other misc. parts for 55 chev.available.call Tracy Moer

1941 willys outlaw body and chassis 502/502 th400 big stall ford 9 355 grs. purple with white leather $65,000 obo trade. 407-957-9804 Dan Zapico

Hilborn stack injectors,4 sm. block chevy,complete intake, & 0 hilborn pump,exc. condititon,$1000.00 also 950 cfm holley alky carb $400.00 noid electic shift for power glide with hurst shifter. $80.00 hurst quarter stick,th 350, 400, used on season $125.00 sm block chevy 2x4 tunnel ram with directport NOS, $500.00 complete with purge valve and extra jets. Edelbrock intake ,sm chevy, with 500cfm carbs with linkage &air filters, $500.00 (610)767-2613 Craig

BBC heads, intake and cam set-up off 610 hp motor, ran 9.70 @ 137 mph in a 2800# car. Heads are oval port cast iron closed chamber 105 cc's, Manley SS valves,Comp Cams springs, Titanium retainers and locks.All work done by Reid's Automotive. Victor Jr. intake port matched to heads. Comp Cams solid lifter .631 lift with lifters and pushrods. Package deal $1,200. MSD HVC coil for MSD 5&6 ignition (new in box) $90. 12 Bolt posi unit only $175. Used set 12 bolt 4:88 Richmond gears $75. Deist universal trans blanket for 350,400 or glide $50. Call Bob days cell# 508-245-4237, nights til 9pm 508-886-6192. Bob Ackerman

New(never mounted) M&H Racemaster Slicks 9x28 1/2x15 (Summit $340.00) $250.00. Ford Truck Hood,Right&Left fenders fit 1992-1997 F150,250,350 nice condition $475.00.MSD HVC coil for 5or6 series box,new in box $85.00.12 Bolt Chevy (Richmond) 488 gears,for 4 series carrier $85.00.Strange 31 spline Axles,shortened 8" for Pro Street,with C clip Eliminators,& 1/2"stud kit $190.00 pr.Moroso Brute Strength Posi Differential (new Summit or Jegs $479.00)$200.00.Diest Trans.Blanket for 350,400,or Power Glide $45.00.Plus S&H all items. Email or Call with questions after 6pm Bob 508-853-3388 or Bob Roach

***Wanted***62' Pontiac Acadian (nova) Front disk conversion info,kit,parts. (905) 666-2598 Matt Peshal

BBC 468 blower shortblock.Tall deck 060 over 454.4 blot.Steel crank 4" stroke.Howard 600 long alu rods.Ross blower 11:1 pistons.Block is o-ring'd.All internally balanced.1500.00 in NY Kurt 845-888-0205

28' enclosed trailer 1800.00.Chassis is factory but the top i built.Real nice.2 6000lb axles with brakes.Flip down rear door.Great for dragster or f/c.6'2 tall 81 1/2 wide.25' inside.2 cabinets inside as well.Have pics!! In NY Kurt 845-888-0205

1993 Jerry Haas Dodge Daytona IROC last one ever built by Jerry Haas built for competition eliminator ,modified,top sportsman,or pro modified. also have a new 4 speed liberty,hays clutches,and much much more. call for details. (440)647-4747 Tim Switzer

1962-1965 chevyII parts,rh fender, hood,decklid,bumbers,glass doors,original 4cyl.all in good condition make offers. Dana Freeman Jr. (508) 548-0778

66 chev 2 pro street car . i am considering raffleing off my car. i need to see response to this ad to determine if it would be a good choice. tickets will be sold for 25.00 per ticket. if this is something you would buy , let me know. thanks Mitch.

YOUR classified(s) could be here! If you are trying to sell any race car or street rod parts and want to have them listed here for FREE, click to fill out a quick form!.

If what you were selling has been sold or is no longer for sale, please inform us by filling out this form.